ligitek electronics co.,ltd. property of ligitek only doc. no : qw0905-lhrf9033/tr2 rev. : a date : 31 - mar. - 2006 lhrf9033/tr2 data sheet surface mount tape and reel lead-free parts pb
1/7 3.05 0.5 2.8 note : the tolerances unless mentioned is 0.2mm,angle 0.5. unit=mm. note : 1.all dimension are in millimeter tolerance is 0.2mm unless otherwise noted. 2.specifications are subject to change without notice. carrier type dimensions 12 0.3 9.3 polarity 5.5 6.43 2.0 4.0 1.75 1.55 3.05 4.0 4.3 0.5 0.7 0.3 package dimensions lhrf9033/tr2 part no. 5.8 0.5 2.0 1.9 0.4 0.1 1.4 2.5 0.5 0.1 cathode page ligitek electronics co.,ltd. property of ligitek only
12.0mm tape,7"reel lhrf9033/tr2 part no. description 178 2.0 14.2 1.0 quantity/reel 1500 devices 74.0 1.5 16.0 1.0 ligitek electronics co.,ltd. property of ligitek only reel dimensions part no. lhrf9033/tr2 2/7 page
v 2000 esd electrostatic discharge note : 1.the forward voltage data did not including 0.1v testing tolerance. 2. the luminous intensity data did not including 15% testing tolerance. material typical electrical & optical characteristics (ta=25 ) lhrf9033/tr2 algainp part no luminous intensity @20ma(mcd) viewing angle 2 1/2 (deg) forward voltage @20ma(v) dominant wave length dnm spectral halfwidth nm 20 water clear red 630 emittedlens color 160 1.52.430020 min. min.max. typ. peak forward current duty 1/10@10khz storage temperature operating temperature reverse current @5v power dissipation forward current -40 ~ +85 -40 ~ +100 t opr tstg pd ir i fp i f 75 mw 10 a 90 30 ma ma absolute maximum ratings at ta=25 parameter page 3/7 absolute maximum ratings symbol hrf unit ligitek electronics co.,ltd. property of ligitek only part no. lhrf9033/tr2
r e l a t i v e i n t e n s i t y @ 2 0 m a 600 wavelength (nm) 550 0 700 650 0.5 0.5 r e l a t i v e i n t e n s i t y @ 2 0 m a n o r m a l i z e @ 2 5 f o r w a r d v o l t a g e @ 2 0 m a n o r m a l i z e @ 2 5 20 ambient temperature( ) fig.5 relative intensity vs. wavelength 1.0 ambient temperature( ) 0.8 -0 -20 -4060 40 2080100 0 -40-20-060 4080100 fig.4 relative intensity vs. temperature 2.5 1.0 0.9 1.1 1.5 1.0 2.0 fig.3 forward voltage vs. temperature 1.2 3.0 100 r e l a t i v e i n t e n s i t y n o r m a l i z e @ 2 0 m a f o r w a r d c u r r e n t ( m a ) forward current(ma) forward voltage(v) 1.5 1.0 0.1 2.5 2.03.01.010 0 1.0 10 0.5 1.0 1.5 2.0 1001000 fig.2 relative intensity vs. forward current fig.1 forward current vs. forward voltage 1000 3.5 2.5 typical electro-optical characteristics curve ligitek electronics co.,ltd. property of ligitek only 3.0 hrf chip page 4/7 part no. lhrf9033/tr2
soldering heat max. 260 preheat 180~200 xc reflow soldering should not be done more than two times. 120 sec.max. 60 ~ 120 sec rising +5 /sec preheat 120 ~ 180 sec recommended soldering conditions 1. hand solder basic spec is Q 280 3 sec one time only. 150 3-2 pb-free reflow solder 1~5 xc/sec 120 3-1. lead reflow solder 240 preheat temp. ( ) 120 ~ 150 2. wave solder above 220 xc 60 sec.max. 1~5 xc/sec 260 xc max. 10sec.max 5sec time cooling -5 /sec 245 5 within 5 sec ligitek electronics co.,ltd. property of ligitek only page5/7 part no. lhrf9033/tr2
led led esd(electrostatic discharge): static electricity or power surge will damage the led. use of a conductive wrist band or anti-electrosatic glove is recommended when handing these led. all devices, equipment and machinery must be properly grounded. (a) recommended circuit. (b) the difference of brightness between led could be found due to the vf-if characteristics of led. cleaning: use alcohol-based cleaning solvents such as isopropyl alcohol to clean the led. precautions for use: storage time: 1.the operation of temperatures and rh are : 5 ~35 ,rh<60%. 2.once the package is opened, the products should be used within a week. otherwise, they should be kept in a damp proof box with descanting agent. considering the tape life, we suggest our customers to use our products within a year(from production date). 3.if opened more than one week in an atmosphere 5 ~ 35 ,rh<60%, they should be treated at 60 5 fo r 15hrs. drive method: led is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. this current limiting typically takes the form of a current limiting resistor placed in series with the led. consider worst case voltage variations than could occur across the current limiting resistor. the forwrd current should not be allowed to change by more than 40% of its desired value. circuit model a circuit model b ligitek electronics co.,ltd. property of ligitek only page 6/7 part no. lhrf9033/tr2
mil-std-202f: 208d mil-std-750d: 2026 mil-std-883d: 2003 iec 68 part 2-20 jis c 7021: a-2 solderability test 1.t.sol=235 5 2.immersion time 2 0.5sec 3.coverage R 95% of the dipped surface mil-std-202f: 107d mil-std-750d: 1051 mil-std-883d: 1010 jis c 7021: a-4 mil-std-750d:2031.2 j-std-020 environmental test ir reflow temperature cycling 1.t=260 xc max. 10sec.max. 2. 6 min 1.105 ~ 25 ~ - 55 ~ 25 30mins 5mins 30mins 5mins 2.10 cyeles ligitek electronics co.,ltd. property of ligitek only mil-std-883d:1008 jis c 7021: b-10 mil-std-750d: 1026 mil-std-883d: 1005 jis c 7021: b-1 mil-std-202f:103b jis c 7021: b-11 jis c 7021: b-12 mil-std-202f: 107d mil-std-750d: 1051 mil-std-883d: 1011 operating life test 1.ta=under room temperature as per data sheet maximum rating. 2.if=20ma 3.t=1000 hrs (-24hrs, +72hrs) thermal shock test high temperature high humidity storage test endurance test low temperature storage test high temperature storage test 1.ta=105 5 &-40 5 (10min) (10min) 2.total 10 cycles 1.ta=65 5 2.rh=90%~95% 3.t=1000hrs 2hrs 1.ta=105 5 2.t=1000 hrs (-24hrs, +72hrs) 1.ta=-40 5 2.t=1000 hrs (-24hrs, +72hrs) reliability test: classificationtest item test condition reference standard page7/7 part no. lhrf9033/tr2
|
